Source language(s): English
Target language(s): Oriya
Details of the project: We are from Honey Translation Company.
We need Oriya translators who have good experience in translation, and who accept to work for long term. If anyone is interested drop a mail or call to the below number.
Phone no. 7708632323
This job is already available.
Sample text (50 to 200 words): English
ECU GROMMET FIXING:
The gourmet is to be cut as indicated below photo 1., cut the extra protection wire of the test pin and also ensure that the purple pins (inserted in the ECU dummy holes) in the ECU coupler socket has to be fully inserted and then strap it in the two location as shown in photo 2.
Finally cover the grommet with black insulation tape from coupler starting to the neck of the wiring harness. Ensure there is no gaps.
Connect the vehicle to Diagnostic Tool and Ensure the following conditions on the Diagnostic Screen. Run the Engine until EOT reaches 75ºC to 80ºC and then adjust the Idling to 1020 - 1070 rpm, check for the Manual Bi-starter and Throttle operations fully open and closed conditions.
If MIL glows continuously connect the vehicle to the diagnostic tool, go to the diagnostic menu and correct the corresponding sensor terminals displayed on the diagnostic screen. Then clear the failure sensor history by DTC clear menu. Every time after clearing the DTC by DOL Tool the engine should be warmed upto 75ºC - 80ºC and then the vehicle should be kept running idle for 3 min. Also save the data.